CyberRear SL-2 wheel-building
Here you find all the necessary instructions to realize your dream wheels with pre-calculated spoke lengths.
Follow instruction step by step:
1)Measure your "spoke-end diameter"
2)Find your rear spoke length (left side) on table A
3)Find your rear spoke length and lacing pattern (drive side) on table B
(All measures are expressed in mm)
4)Lace the wheel respecting correct lacing pattern (see below)
Maximum spoke tension:- Refer to manual
Warning: spoke lacing and tensioning require skills and experience,refer to an expert professional wheel builder for these operations.
1)"spoke-end diameter"
Rim manufacturers always offer ERD figures however we warmly recommend to precisely measure the rim+nipple combination.
Basically
a correct spoke calculation requires exact "spoke-end diameter" and rim drilling.
Spoke-end
diameter depends on your rim internal diameter and nipple type.
How to measure "spoke-end diameter"
2)CyberRear SL-2
Left side - Radial lacing - Elbow spokes
Spoke-end
Diameter |
Spoke
Length
|
515 |
243 |
520 |
245 |
525 |
248 |
530 |
250 |
535 |
252 |
540 |
255 |
545 |
257 |
550 |
260 |
555 |
262 |
560 |
265 |
565 |
267 |
570 |
270 |
575 |
272 |
580 |
275 |
585 |
277 |
590 |
280 |
595 |
282 |
600 |
285 |
605 |
287 |
610 |
290 |
Table A
Note: We
list "spoke-end diameters" every 5mm step. If your "spoke-end
diameter" measure is in between 2 steps adjust your spoke length consequently.
Example 1: your "spoke-end diameter" is 563mm use 266mm spoke.
Example 2: your "spoke-end diameter" is 567mm use 268mm spoke.
Example 3: your "spoke-end diameter" is 569mm use 270mm spoke.
Lacing: radial on interal flange side, use only D/B spokes (central section equivalent to Ø 1.5mm).
3)CyberRear SL-2
Drive side - Elbow spokes
Spoke-end
Diameter
|
Spoke
Length
24H |
Spoke
Length
20H and 28H |
515
|
259-260
|
267
|
520
|
262
|
269-270
|
525
|
264-265
|
272
|
530
|
267
|
274-275
|
535
|
269-270
|
277
|
540
|
272
|
279-280
|
545
|
274-275
|
282
|
550 |
277
|
284-285
|
555
|
279-280
|
287
|
560
|
282
|
289-290
|
565
|
284-285
|
292
|
570
|
287
|
294-295
|
575
|
289-290
|
297
|
580
|
292
|
299-300
|
585
|
294-295
|
302
|
590
|
297
|
304-305
|
595
|
299-300
|
307
|
600
|
302
|
309-310
|
605
|
304-305
|
312
|
610
|
307
|
314-315
|
610 |
309-310 |
317 |
Table B
Note:
We list "spoke-end diameters" every 5mm step. If your "spoke-end
diameter" measure is in between 2 steps adjust your spoke length consequently.
Lacing: correct lacing patterns with elbow spokes must be as shown below.
100% made in Italy